Breast density in NF1 women: a retrospective study.

Neurofibromatosis type 1 (NF1) is an autosomal dominant condition caused by neurofibromin haploinsufficiency due to pathogenic variants in the NF1 gene. Tumor predisposition has long been associated with NF1, and an increased breast cancer (BC) incidence and reduced survival have been reported in recent years for women with NF1. As breast density is another known independent risk factor for BC, this study aims to evaluate the variability of breast density in patients with NF1 compared to the general population. Mammograms from 98 NF1 women affected by NF1, and enrolled onto our monocentric BC screening program, were compared with those from 300 healthy subjects to verify differences in breast density. Mammograms were independently reviewed and scored by a radiologist and using a Computer-Aided Detection (CAD) software. The comparison of breast density between NF1 patients and controls was performed through Chi-squared test and with multivariable ordinal logistic models adjusted for age, body mass index (BMI), number of pregnancies, and menopausal status.breast density was influenced by BMI and menopausal status in both NF1 patients and healthy subjects. No difference in breast density was observed between NF1 patients and the healthy female population, even after considering the potential confounding factors.Although NF1 and a highly fibroglandular breast are known risk factors of BC, in this study, NF1 patients were shown to have comparable breast density to healthy subjects. The presence of pathogenic variants in the NF1 gene does not influence the breast density value.

Organotypic human lung bud microarrays identify BMP-dependent SARS-CoV-2 infection in lung cells.

Although lung disease is the primary clinical outcome in COVID-19 patients, how SARS-CoV-2 induces lung pathology remains elusive. Here we describe a high-throughput platform to generate self-organizing and commensurate human lung buds derived from hESCs cultured on micropatterned substrates. Lung buds resemble human fetal lungs and display proximodistal patterning of alveolar and airway tissue directed by KGF. These lung buds are susceptible to infection by SARS-CoV-2 and endemic coronaviruses and can be used to track cell type-specific cytopathic effects in hundreds of lung buds in parallel. Transcriptomic comparisons of infected lung buds and postmortem tissue of COVID-19 patients identified an induction of BMP signaling pathway. BMP activity renders lung cells more susceptible to SARS-CoV-2 infection and its pharmacological inhibition impairs infection by this virus. These data highlight the rapid and scalable access to disease-relevant tissue using lung buds that recapitulate key features of human lung morphogenesis and viral infection biology.

Self-organized stem cell-derived human lung buds with proximo-distal patterning and novel targets of SARS-CoV-2.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the causative agent of the global COVID-19 pandemic and the lack of therapeutics hinders pandemic control1-2. Although lung disease is the primary clinical outcome in COVID-19 patients1-3, how SARS-CoV-2 induces tissue pathology in the lung remains elusive. Here we describe a high-throughput platform to generate tens of thousands of self-organizing, nearly identical, and genetically matched human lung buds derived from human pluripotent stem cells (hPSCs) cultured on micropatterned substrates. Strikingly, in vitro-derived human lung buds resemble fetal human lung tissue and display in vivo-like proximo-distal coordination of alveolar and airway tissue differentiation whose 3D epithelial self-organization is directed by the levels of KGF. Single-cell transcriptomics unveiled the cellular identities of airway and alveolar tissue and the differentiation of WNThi cycling alveolar stem cells, a human-specific lung cell type4. These synthetic human lung buds are susceptible to infection by SARS-CoV-2 and endemic coronaviruses and can be used to track cell type-dependent susceptibilities to infection, intercellular transmission and cytopathology in airway and alveolar tissue in individual lung buds. Interestingly, we detected an increased susceptibility to infection in alveolar cells and identified cycling alveolar stem cells as targets of SARS-CoV-2. We used this platform to test neutralizing antibodies isolated from convalescent plasma that efficiently blocked SARS-CoV-2 infection and intercellular transmission. Our platform offers unlimited, rapid and scalable access to disease-relevant lung tissue that recapitulate key hallmarks of human lung development and can be used to track SARS-CoV-2 infection and identify candidate therapeutics for COVID-19.

3D Patterning of cells in Magnetic Scaffolds for Tissue Engineering.

A three dimensional magnetic patterning of two cell types was realised in vitro inside an additive manufactured magnetic scaffold, as a conceptual precursor for the vascularised tissue. The realisation of separate arrangements of vascular and osteoprogenitor cells, labelled with biocompatible magnetic nanoparticles, was established on the opposite sides of the scaffold fibres under the effect of non-homogeneous magnetic gradients and loading magnetic configuration. The magnetisation of the scaffold amplified the guiding effects by an additional trapping of cells due to short range magnetic forces. The mathematical modelling confirmed the strong enhancement of the magnetic gradients and their particular geometrical distribution near the fibres, defining the preferential cell positioning on the micro-scale. The manipulation of cells inside suitably designed magnetic scaffolds represents a unique solution for the assembling of cellular constructs organised in biologically adequate arrangements.

Customised multiphasic nucleus/annulus scaffold for intervertebral disc repair/regeneration.

Background: In the case of a degenerated intervertebral disc (IVD), even though spinal fusion has provided good short-term clinical results, an alteration of the spine stability has been demonstrated by long-term studies. In this context, different designs of IVD prostheses have been proposed as alternative to spinal fusion. However, over the past few years, much of the recent research has been devoted to IVD tissue engineering, even if several limitations related to the complex structure of IVD are still presented.Purpose/Aim: Accordingly, the aim of the current paper was to develop a strategy in designing customised multiphasic nucleus/annulus scaffolds for IVD tissue engineering, benefiting from the great potential of reverse engineering, additive manufacturing and gels technology.Materials and Methods: The device consisted of a customised additive-manufactured poly(ε-caprolactone) scaffold with tailored architectural features as annulus and a cell-laden collagen-low molecular weight hyaluronic acid-based material as nucleus with specific rheological and functional properties. To this aim, injectability and viscoelastic properties of the hydrogel were analyzed. Furthermore, a mechanical and biological characterization of cell-laden multiphasic nucleus/annulus scaffold was performed.Results and Conclusions: Analyses on the developed devices demonstrated appropriate viscoelastic and mechanical properties. As evidenced by rheological tests, the hydrogel showed a shear-thinning behaviour, supporting the possibility to inject the material. The mechanical characterization highlighted a compressive modulus which falls in the range of lumbar discs, with the typical initial J-shaped stress-strain curve of natural IVDs. Furthermore, preliminary biological tests showed that human mesenchymal stem cells were viable over the culture period.

Occupational Therapy's efficacy in children with Asperger's syndrome: a systematic review of randomized controlled trials.

This systematic review of randomized controlled trials (RCTs) aims at evaluating the efficacy of Occupational therapy (OT) interventions in Asperger's syndrome (AS) pediatric patients. We conducted a systematic review according to PRISMA guidelines. The screening of the literature was carried out on PUBMED, SCOPUS, WEB OF SCIENCE and OT SEEKER databases, TO December 2018. We selected three RCTs having the common objective to evaluate whether children with AS can improve their social skills thanks to OT treatments. The interventions targeted by the three selected studies were: LEGO therapy, Social Use of Language Programme, Let's Face It! software and Parent Training combined with the administration of risperidone. All the studies showed that the intervention groups improved their overall social ability.This review shows that OT interventions can help concretely AS children in overcoming their social issues. Nevertheless, more RCTs are needed to better understand the OT's benefits and limitations in AS patients.

The Role of the Occupational Therapist in Disaster Areas: Systematic Review.

BACKGROUND: Disasters are increasingly more frequent events on our planet. During disaster the role of the occupational therapist will require a more specific operative framework within nongovernmental organizations and community health services. DESIGN: Systematic review. OBJECTIVE: The aim of this study is to evaluate the evidence that highlight occupational therapist's role in disaster area through a systematic review. MATERIALS AND METHODS: Research on MEDLINE was performed. All articles from 2005 to 2015 concerning rehabilitation and occupational therapy in disaster areas were included. RESULTS: Ten studies were selected to be included in this review. Four interesting points emerged: the importance of having rehabilitation intervention in postdisaster situations, the necessity to include a rehabilitation team in the early phase of disaster response, the need to provide a method to address the difficult evacuation, and finding the safest method of transport of people with preexisting disabilities and new injuries. CONCLUSIONS: The amount of evidence with respect to specific intervention of the occupational therapist's role in a disaster situation is limited. However some evidence suggests that it could be a good means for reducing the number of medical complications and deaths of persons with preexisting disabilities. The evidences found highlight the necessity to create a multidisciplinary team addressing needs in disasters situation, in which the occupational therapist could certainly contribute.

Surface functionalization of acrylic based photocrosslinkable resin for 3D printing applications.

The limited number of resins, available for stereolithography applications, is one of the key drivers in research applied to rapid prototyping. In this work an acrylic photocrosslinkable resin based on methyl methacrylate (MMA), butyl methacrylate (BMA) and poly(ethylene glycol) dimethacrylate (PEGDA) was developed with different composition and characterized in terms of mechanical, thermal and biological behaviour. Two different systems have been developed using different amount of reagent. The influence of every components have been evaluated on the final characteristic of the resin in order to optimize the final composition for applications in bone tissue engineering. The crosslinked materials showed good mechanical properties and thermal stabilities and moreover cytotoxicity test confirms good biocompatibility with no cytotoxic effect on cells metabolism. Moreover two different treatments have been proposed, using fetal bovine serum (FBS) and methanol (MeOH), in order to improve cell recognition of the surfaces. Samples threatened with MeOH allow cell adhesion and survival, promoting spreading, elongation and fusion of C2C12 muscle myoblast cells.

Preliminary focus on the mechanical and antibacterial activity of a PMMA-based bone cement loaded with gold nanoparticles.

In total knee arthroplasty (TKA) and total hip replacement (THR) the restoration of the normal joint function represents a fundamental feature. A prosthetic joint must be able to provide motions and to transmit functional loads. As reported in the literature, the stress distribution may be altered in bones after the implantation of a total joint prosthesis. Some scientific works have also correlated uncemented TKA to a progressive decrease of bone density below the tibial component. Antibiotic-loaded bone cements are commonly employed in conjunction with systemic antibiotics to treat infections. Furthermore, nanoparticles with antimicrobial activity have been widely analysed. Accordingly, the current research was focused on a preliminary analysis of the mechanical and antibacterial activity of a PMMA-based bone cement loaded with gold nanoparticles. The obtained results demonstrated that nanocomposite cements with a specific concentration of gold nanoparticles improved the punching performance and antibacterial activity. However, critical aspects were found in the optimization of the nanocomposite bone cement.

Comparison of survival between radiation therapy and trans-oral laser microsurgery for early glottic cancer patients; a retrospective cohort study.

BACKGROUND: The literature reports various treatment methodologies, such as trans-oral laser microsurgery, radiation therapy, total/partial laryngectomies, and concurrent radiation chemotherapy for patients with early larynx cancer. However, at the forefront of early glottis treatment is trans-oral laser microsurgery and radiation therapy, likely due to better functional and survival outcomes. Here we conduct the largest Canadian head-to-head comparison of consecutive patients treated with either radiation therapy or trans-oral laser microsurgery. Additionally, we compare these two treatments and their 5-year survival rates post treatment to add to the existing literature. METHODS: Charts of patients who were diagnosed with early glottic cancer between 2006 and 2013 were reviewed. Seventy-five patients were identified, and split into 2 groups based on their primary treatment, trans-oral laser microsurgery and radiation therapy. Kaplan-Meier survival curves, life-tables, and the log-rank statistic were reported to determine if there was a difference between the two treatment groups and their disease-specific survival, disease-free survival, and total laryngectomy-free survival. Additionally, each different survival analysis was stratified by potential confounding variables, to help conclude which treatment is more efficacious in this population. RESULTS: The 5-year disease-specific survival rate is 93.3 % σ = 0.063 and 90.8 % σ = 0.056 for patients treated with trans-oral laser microsurgery and radiation therapy, respectively (χ (2) < 0.001, p = 0.983). The disease free survival rate is 60.0 % (σ =0.121) for patients treated with trans-oral laser microsurgery, and 67.2 % (σ = 0.074) for those who received RT (χ (2) = 0.19, p = 0.663). Additionally, the total laryngectomy-free survival rate is 84.1 % (σ = 0.1) and 79.1 % (σ = 0.072) for patients' early glottic cancer treated by trans-oral laser microsurgery and radiation therapy, respectively (χ (2) = 0.235, p = 0.628). Chi-square analysis of age-group versus treatment group (χ (2) = 6.455, p = 0.04) and T-stage versus treatment group (χ (2) = 11.3, p = 0.001) revealed a statistically significant relationship, suggesting survival analysis should be stratified by these variables. However, after stratification, there was no statistically significant difference between the trans-oral laser microsurgery and radiation therapy groups in any of the survival analyses. CONCLUSION: No difference was demonstrated in the 5-year disease-specific survival, disease-free survival, and total laryngectomy-free survival, between the RT and TLM treatment groups. Additionally, both groups showed similar 5-year survival after stratifying by confounding variables.

Heat and moisture exchanger use reduces in-hospital complications following total laryngectomy: a case-control study.

BACKGROUND: Total laryngectomy (TL) is an appropriate oncologic operation for many patients with laryngeal cancer delivering excellent oncologic outcomes, however it remains beset with significant functional consequences. Following TL, the upper and lower airways are permanently disconnected, which causes unfiltered, cold air with reduced humidity to enter the tracheobronchial tree, resulting in mucus overproduction and an increase in the viscosity of the mucus. In response to this, Heat and moisture exchangers were developed to compensate for the lost functions of the upper respiratory tract and their effect on the patients' respiratory performance in addition to their quality of life. METHODS: The case records of 48 patients undergoing total laryngectomy were reviewed and data concerning demographics, surgical details, post-operative care requirements and adverse events was retrieved. Post hoc analysis of the case patients was undertaken to identify any benefit of using a heat and moisture exchanger (HME) system with particular reference to post-operative respiratory outcomes. RESULTS: There was no significant difference between case and control subjects based on demographics, extent of surgery or need for flap repair. 16 patients had used a HME and 32 patients had used external humidification (EH). Of those experiencing mucous plugging, only 3/24 (12.5 %) had used a HME system, in contrast to 21/24 (87.5 %) who used EH (Chi square = 9.375, p = 0.002). The odds ratio of having an adverse event if not using HME was 8.27 (CI = 1.94 - 35.71). Use of HME also significantly reduced the number of days requiring physiotherapy (1.75 days vs. 3.20 days, p = 0.034). CONCLUSION: Use of an HME system can reduce in-hospital complications, in particular episodes of mucus plugging, and post-operative care requirements. Furthermore, there is a cost benefit to using HME systems that warrants more widespread introduction of these devices in head and neck surgery centers.

Bioactivation of calcium deficient hydroxyapatite with foamed gelatin gel. A new injectable self-setting bone analogue.

An alternative approach to bone repair for less invasive surgical techniques, involves the development of biomaterials directly injectable into the injury sites and able to replicate a spatially organized platform with features of bone tissue. Here, the preparation and characterization of an innovative injectable bone analogue made of calcium deficient hydroxyapatite and foamed gelatin is presented. The biopolymer features and the cement self-setting reaction were investigated by rheological analysis. The porous architecture, the evolution of surface morphology and the grains dimension were analyzed with electron microscopy (SEM/ESEM/TEM). The physico-chemical properties were characterized by X-ray diffraction and FTIR analysis. Moreover, an injection test was carried out to prove the positive effect of gelatin on the flow ensuing that cement is fully injectable. The cement mechanical properties are adequate to function as temporary substrate for bone tissue regeneration. Furthermore, MG63 cells and bone marrow-derived human mesenchymal stem cells (hMSCs) were able to migrate and proliferate inside the pores, and hMSCs differentiated to the osteoblastic phenotype. The results are paving the way for an injectable bone substitute with properties that mimic natural bone tissue allowing the successful use as bone filler for craniofacial and orthopedic reconstructions in regenerative medicine.

The first systematic analysis of 3D rapid prototyped poly(ε-caprolactone) scaffolds manufactured through BioCell printing: the effect of pore size and geometry on compressive mechanical behaviour and in vitro hMSC viability.

Novel additive manufacturing processes are increasingly recognized as ideal techniques to produce 3D biodegradable structures with optimal pore size and spatial distribution, providing an adequate mechanical support for tissue regeneration while shaping in-growing tissues. With regard to the mechanical and biological performances of 3D scaffolds, pore size and geometry play a crucial role. In this study, a novel integrated automated system for the production and in vitro culture of 3D constructs, known as BioCell Printing, was used only to manufacture poly(ε-caprolactone) scaffolds for tissue engineering; the influence of pore size and shape on their mechanical and biological performances was investigated. Imposing a single lay-down pattern of 0°/90° and varying the filament distance, it was possible to produce scaffolds with square interconnected pores with channel sizes falling in the range of 245-433 µm, porosity 49-57% and a constant road width. Three different lay-down patterns were also adopted (0°/90°, 0°/60/120° and 0°/45°/90°/135°), thus resulting in scaffolds with quadrangular, triangular and complex internal geometries, respectively. Mechanical compression tests revealed a decrease of scaffold stiffness with the increasing porosity and number of deposition angles (from 0°/90° to 0°/45°/90°/135°). Results from biological analysis, carried out using human mesenchymal stem cells, suggest a strong influence of pore size and geometry on cell viability. On the other hand, after 21 days of in vitro static culture, it was not possible to detect any significant variation in terms of cell morphology promoted by scaffold topology. As a first systematic analysis, the obtained results clearly demonstrate the potential of the BioCell Printing process to produce 3D scaffolds with reproducible well organized architectures and tailored mechanical properties.

Guidelines for the use of long-term central venous catheter in children with hemato-oncological disorders. On behalf of supportive therapy working group of Italian Association of Pediatric Hematology and Oncology (AIEOP).

In the last 30 years, the use of long-term central venous catheters (CVC) is increased especially for children with hemato-oncological disorders. However, the use of CVC is associated to complications, as mechanical accidents, thrombosis, and infections that can determine a prolongation of hospital stay, an increase of costs, and sometimes life-threatening conditions that require urgent systemic treatment or CVC removal. CVC removal may be troublesome especially in neonates, infants, or any other "highly needed CVC patients"; in these selected cases, the prevention and treatment of CVC-related complications play a pivotal role and specific surveillance programs are crucial. While extensive literature is focused on CVC management in adults, no guidelines are available for children. To this aim, the first recommendations for the management of CVC infectious complication in pediatric age have been written after pediatric and adult literature review and collegial discussion among members of Supportive Therapy working group of Italian Association of Pediatric Hematology and Oncology. Compared to the adult age, the necessity of peripheral vein cultures for the diagnosis of CVC-related infection remains controversial in children because of the poorer venous asset and a conservative, pharmacologically focused management through CVC remains mandatory, with CVC removal to be performed only in selected cases.

Magnetic poly(ε-caprolactone)/iron-doped hydroxyapatite nanocomposite substrates for advanced bone tissue engineering.

In biomedicine, magnetic nanoparticles provide some attractive possibilities because they possess peculiar physical properties that permit their use in a wide range of applications. The concept of magnetic guidance basically spans from drug delivery and hyperthermia treatment of tumours, to tissue engineering, such as magneto-mechanical stimulation/activation of cell constructs and mechanosensitive ion channels, magnetic cell-seeding procedures, and controlled cell proliferation and differentiation. Accordingly, the aim of this study was to develop fully biodegradable and magnetic nanocomposite substrates for bone tissue engineering by embedding iron-doped hydroxyapatite (FeHA) nanoparticles in a poly(ε-caprolactone) (PCL) matrix. X-ray diffraction analyses enabled the demonstration that the phase composition and crystallinity of the magnetic FeHA were not affected by the process used to develop the nanocomposite substrates. The mechanical characterization performed through small punch tests has evidenced that inclusion of 10 per cent by weight of FeHA would represent an effective reinforcement. The inclusion of nanoparticles also improves the hydrophilicity of the substrates as evidenced by the lower values of water contact angle in comparison with those of neat PCL. The results from magnetic measurements confirmed the superparamagnetic character of the nanocomposite substrates, indicated by a very low coercive field, a saturation magnetization strictly proportional to the FeHA content and a strong history dependence in temperature sweeps. Regarding the biological performances, confocal laser scanning microscopy and AlamarBlue assay have provided qualitative and quantitative information on human mesenchymal stem cell adhesion and viability/proliferation, respectively, whereas the obtained ALP/DNA values have shown the ability of the nanocomposite substrates to support osteogenic differentiation.

Three-dimensional poly(ε-caprolactone) bioactive scaffolds with controlled structural and surface properties.

The requirement of a multifunctional scaffold for tissue engineering capable to offer at the same time tunable structural properties and bioactive interface is still unpaired. Here we present three-dimensional (3D) biodegradable polymeric (PCL) scaffolds with controlled morphology, macro-, micro-, and nano-mechanical performances endowed with bioactive moieties (RGD peptides) at the surface. Such result was obtained by a combination of rapid prototyping (e.g., 3D fiber deposition) and surface treatment approach (aminolysis followed by peptide coupling). By properly designing process conditions, a control over the mechanical and biological performances of the structure was achieved with a capability to tune the value of compressive modulus (in the range of 60-90 MPa, depending on the specific lay-down pattern). The macromechanical behavior of the proposed scaffolds was not affected by surface treatment preserving bulk properties, while a reduction of hardness from 0.50-0.27 GPa to 0.1-0.03 GPa was obtained. The penetration depth of the chemical treatment was determined by nanoindentation measurements and confocal microscopy. The efficacy of both functionalization and the following bioactivation was monitored by analytically quantifying functional groups and/or peptides at the interface. NIH3T3 fibroblast adhesion studies evidenced that cell attachment was improved, suggesting a correct presentation of the peptide. Accordingly, the present work mainly focuses on the effect of the surface modification on the mechanical and functional performances of the scaffolds, also showing a morphological and analytical approach to study the functionalization/bioactivation treatment, the distribution of immobilized ligands, and the biological features.

AvidinOX™ for tissue targeted delivery of biotinylated cells.

AvidinOX™, a product containing aldehyde groups, generated by ligand-assisted sugar oxidation of avidin by sodium periodate, maintains the capacity to bind biotin with very high affinity and exhibits the property to chemically link cellular and tissue proteins through Schiff's base formation thus residing in tissues for weeks. In recent studies, we have shown that AvidinOX exhibits much higher persistency in the skeletal muscle than native avidin. The aim of the present study is to evaluate whether AvidinOX-biotin interaction might be exploited to target biotinylated cells to an AvidinOX pre-treated muscle. To accomplish this we performed the following experiments: 1) The proliferation and differentiation properties of biotinylated C2C12 myoblasts were tested in vitro upon linkage to AvidinOX; 2) Bone marrow-derived cells (BMDC) were isolated from GFP positive transgenic mice [strain C57 BL/6-tg (UBC-GFP)] and after biotinylation (bBMDC) were intravenously administered to naive and MAVA+ (Mouse anti Avidin Antibody) C57/B6 mice previously injected with AvidinOX in a tibial muscle (TM). Localization efficiency of GFP+ bBMDC was evaluated on serial sections of the AvidinOX- and vehicle-treated (contra lateral limb) TM, 5 days after transplantation. Results show that biotinylated C2C12 cells, once linked to AvidinOX, maintain their proliferation and differentiation capacity, in vitro. Intravenous injection of biotinylated GFP+ bone marrow-derived cells leads to their specific and efficient localization in the AvidinOX-pre-treated, but not contra lateral muscle of both naive and MAVA+ mice. The present data suggest a potential use of AvidinOX to improve tissue targeted delivery of biotinylated cells.

A FRET based melting curve analysis to detect nucleotide variations in HA receptor-binding site of H5N1 virus.

Outbreaks of highly pathogenic H5N1 influenza A virus represent a major public health problem because of the possibility of direct transmission of these viruses from avian species to humans. For influenza H5N1 hemagglutinin, a switch from SA-a-2, 3-Gal to SA-a-2, 6-Gal receptor specificity is a critical step that could lead to inter-human transmission. The monitoring of the receptor-binding preference of H5N1 viruses represents an instrument to detect a potential pandemic virus. The aim of this study was to develop a method based on the fluorescence resonance energy transfer (FRET) technology and melting peaks analysis for rapid screening of pandemic H5N1 influenza A virus. Three selected probes corresponding to a 23bp nucleotide sequence of the avian receptor-binding site were used in a real-time RT-PCR to detect nucleotide variations. Five strains of avian influenza A viruses isolated from avian species and two synthesized HA gene were tested. The results showed that the melting peaks analysis is a reliable screening method for detecting the variability of the H5N1 receptor-binding site.

Fast curing of restorative materials through the soft light energy release.

OBJECTIVE: The effect of a novel light curing process, namely soft light energy release (SLER), on shrinkage, mechanical strength and residual stress of four dental restorative materials (DEI experience, Gradia Direct, Enamel Plus HFO and Venus) was investigated. METHODS: Composite specimens were fast cured through high level of power density and soft light energy release. Temperature, linear shrinkage and light power measurements were acquired in parallel in order to assess the effect of light modulation on temperature and shrinkage profiles during the light curing process and the following dark reaction phase. The small punch test and Raman spectroscopy were adopted to investigate the effect of SLER on mechanical strength and on internal stress, respectively. RESULTS: The soft light energy release photo-polymerization allows to reduce of about 20% the shrinkage rate and to increase the strength of fast light cured specimens. In addition, a more relaxed and homogeneous internal stress distribution was observed. SIGNIFICANCE: Properties of fast cured restorative materials can be improved by adopting the soft light energy release process.

IART (Intra-Operative Avidination for Radionuclide Therapy) for accelerated radiotherapy in breast cancer patients. Technical aspects and preliminary results of a phase II study with 90Y-labelled biotin.

BACKGROUND: Breast conserving surgery (BCS) plus external beam radiotherapy (EBRT) is considered the standard treatment for early breast cancer. We have investigated the possibility of irradiating the residual gland, using an innovative nuclear medicine approach named IART(®) (Intra-operative Avidination for Radionuclide Therapy). AIM: The objective of this study was to determine the optimal dose of avidin with a fixed activity (3.7 GBq) of (90)Y-biotin, in order to provide a boost of 20 Gy, followed by EBRT to the whole breast (WB) at the reduced dose of 40 Gy. Local and systemic toxicity, patient's quality of life, including the cosmetic results after the combined treatment with IART(®) and EBRT, were assessed. METHODS: After tumour excision, the surgeon injected native avidin diluted in 30 ml of saline solution into and around the tumour bed (see video). Patients received one of three avidin dose levels: 50 mg (10 pts), 100 mg (15 pts) and 150 mg (10 pts). Between 12 to 24 h after surgery, 3.7 GBq (90)Y-biotin spiked with 185 MBq (111)In-biotin was administered intravenously (i.v.). Whole body scans and SPECT images were performed up to 30 h post-injection for dosimetric purposes. WB-EBRT was administered four weeks after the IART(®) boost. Local toxicity and quality of life were evaluated. RESULTS: Thirty-five patients were evaluated. No side effects were observed after avidin administration and (90)Y-biotin infusion. An avidin dose level of 100 mg resulted the most appropriate in order to deliver the required radiation dose (19.5 ± 4.0 Gy) to the surgical bed. At the end of IART(®), no local toxicity occurred and the overall cosmetic result was good. The tolerance to the reduced EBRT was also good. The highest grade of transient local toxicity was G3, which occurred in 3/32 pts following the completion of WB-EBRT. The combination of IART(®)+EBRT was well accepted by the patients, without any changes to their quality of life. CONCLUSIONS: These preliminary results support the hypothesis that IART(®) may represent a valid approach to accelerated WB irradiation after BCS. We hope that this nuclear medicine technique will contribute to a better management of breast cancer patients.